1270 results found

The HEISLER Lid Placers are designed to dispense, position, and seal lids on filled containers. Our Lid Placers are available in models for plastic and metal containers. These machines come in fixed or adjustable models. For lids that require orienting, the Lid Placer can be equipped to orient a spout in relation to the handle. Our Lid Placers can dispense up to 40 lids per minute. We have semi-automatic to fully automatic models available. Closer options include roller, traversing press, crimping, and screw-on.

Used Visual Pak 6 Station Automatic Rotary Blister Heat Seal Machine, Model SDS6S-1418. Serial #42460994. This unit is designed for medium to higher volume of 10 cycles per minute. Comes with Automatic Infeed and Discharge. Unit features start/stop, emergency stop, temperature controls, dwell time controls and rotary table speed controls. Sealing area: 14” x 18”, Blister depth: 3 ¼”, Seal pressure: 2900 lbs @ 100 psi, Seal time: 0-99 seconds, Dwell time: 0-99 seconds. Electrics: 1/60/110. Was last used in a large cosmetics company and is available for immediate delivery.

Unit is in excellent working condition. 2KW output, water cooled, manufacturer rated for over 300 feet per minute line speeds, configured with a sealing head for up to 48mm diameter caps, mounted on an aluminum stand with crank height adjustment; on casters. The tamper evident cap sealer head is set for a 230 volt 3 phase 50/60 Hz 6 amp electrical input. Comes complete with Model RWAG-3, Type 1810-0008, 1.5 gallon per minute water cooling system set for 115 volt, 12 amp, 50-60 cycle and 1Hz electrical input.

The AccuPlace model 4090 is designed to assemble specifically large adhesive components within its 4.0” x 9.0” / 10.1 cm x 22.86 cm capacity. The machine offers a wide range of features, options and software parameters. This allows optimal adaptation to your specific requirements. Various placement actuator options allow practically any kind of part placement. With a repeatability of ± 0.002” / 0.05 mm, the model 4090 is the most capable and accurate machine for placing large film adhesive components.

Used Capsulit 2 Head Automatic “Push On” Capper. Serial #: 6085. Unit was manufactured in 1982 and comes with the following features: 18” diameter vibratory cap feeder, 2 head capper, star wheel in feed, 10’ variable speed conveyor with 4-1/2” wide belt and adjustable guide rails, Plexiglas guarding with integrated safety interlocks and a separate control panel with start/stop, emergency stop, variable controls for conveyor and bowl. Unit sits on leveling legs and was last used in a large pharmaceutical facility. Electrics: 3/60/480 volts, Conveyor 1/60/115Volts. Comes complete and is available for immediate delivery.

The AccuPlace model 3065 is designed to assemble virtually any self-adhesive component within its 3.0” x 6.5” / 7.6 cm x 16.5 cm capacity. The machine has a compact foot print and offers a wide range of features, options and software parameters. This allows optimal adaptation to your specific requirements. Various placement actuator options allow practically any kind of part placement. The model 3065 is the most capable and accurate machine of its kind.

Pails with lids placed on them are slid onto the powered section of the infeed conveyor. The conveyor carries the pails under the screw closer. The pail is clamped while the screw closer moves down onto the lid. The lid is engaged to correctly align the lid/pail threads. Once the threads are engaged, the closer will screw the lid onto the pail until the tamperproof latches are engaged.

The AccuPlace model 3065 is designed to assemble virtually any self-adhesive component within its 3.0” x 6.5” / 7.6 cm x 16.5 cm capacity. The machine has a compact foot print and offers a wide range of features, options and software parameters. This allows optimal adaptation to your specific requirements. Various placement actuator options allow practically any kind of part placement. The model 3065 is the most capable and accurate machine of its kind.

The AccuPlace model 1515 is the ideal solution for placing small parts requiring high accuracy within a small budget. A liner size of up to 1.5” x 1.5” / 3.8 cm x 3.8 cm permits an inexpensive solution to a large number of applications and industries. Different configurations – a bench top version with finger switches for semi automatic operation and a rotary table with light curtain for continuous operation - are available.