51 results found

Switchback and Vitran II are the finest UV cure systems available. M&R’s patented dual-reflector technology delivers faster curing, lower energy costs, and cooler operation. Each system uses a secondary reflector—positioned at the top of the primary reflector—to capture the energy that normally bounces down onto the lamp. The secondary reflector redirects this UV energy onto the substrate, speeding the curing process while saving energy and prolonging lamp life. Open-top reflector chambers allow heat and ozone to escape. Powerful turbines hold down even lightweight substrates while drawing cool air under the reflector and across the belt and lamps.

M&R’s most aggressively priced multi-color UV system prints and cures up to six colors simultaneously. Since substrates don’t need to be dried and stacked between colors, they don’t have to be handled repeatedly. This prevents dimensional changes to substrates, and is especially beneficial for fragile substrates like glass. Since Insignia delivers finished prints in one revolution, it’s possible to do color and registration adjustments for customer approval prior to the production run. Servo drive with adjustable index speed is standard. Insignia can index in either direction, and features automatically synchronized gear-driven screen peel and M&R’s patented ink retrieval system.

Guardian II, the industry’s most efficient, innovative, and affordable high-production graphic gas dryer, is available in belt widths from 122 to 213 cm (48" to 84"). Not only does it have the highest production capacity in its class, it’s also the most energy efficient. Heavy-duty thermal insulation prevents heat from migrating into the workplace; CoolSkin technology leaves the dryer skin cool to the touch; and exhaust gasses heat incoming air. Fast cure rates and high product throughput maximize dryer capacity and minimize per-unit cost. Available in liquid propane (LP) or Natural Gas (NG), the high performance burners are designed with excess capacity that far exceeds consumption rates under normal operating conditions.

Processor II E is simply the finest inline multi-color print /cure system available. It has larger four-post shafts and enclosed heavy‑duty printheads with extrusions twice as wide as the previous generation. Features include master touch-screen control panels at the load and unload stations, with secondary touch-screen panels at each printhead. Printhead and UV settings can be controlled from any touch-screen. Processor II E can support up to eight cameras feeding video into an oversize display panel, allowing operators at the load and unload stations to closely monitor each printhead and the unloading process.

MultiGrip’s compact modular design delivers unrivaled performance today and an upgrade path to more colors tomorrow. And MultiGrips are fast, flexible, reliable, and simple to operate. The separation of print/cure functions allows simultaneous printing and curing to maximize press speed.

Conquest is M&R’s versatile multi-color UV carousel printing system. Its unique design reduces labor costs by printing and curing up to six colors simultaneously. Since substrates don’t need to be dried and stacked between colors, they don’t have to be handled repeatedly. This prevents dimensional changes to substrates, and is especially beneficial for fragile substrates like glass. Since Conquest delivers finished prints in one revolution, it’s possible to do color and registration adjustments for customer approval prior to the production run.

The materials are atomized into foggy liquid drops by atomizing nozzle through the high pressure produced in the high pressure pump and are sprayed into the drying chamber. The hot air after filtration will directly contact the materials and the moisture will be rapidly evaporated and the drops will be dried into small dry particles. The equipment is applicable for drying of various heat sensitive materials, such as milk, soybean milk, liquid egg, fruit and vegetable juice, liquid medicine, protein powder, sugar powder, tea leaves and various powder food additives. It has such advantages as high drying efficiency and maintaining the effective components of materials not to be destroyed.

Kongskilde KCD drier is designed to provide the best possible heat economy and gentle drying and cooling of the crop in one continuos operation. The good drying economy is due to the tapered shape and pattern of the air ducts. The drier is built from galvanised components for a long service life.

Kongskilde KCD drier is designed to provide the best possible heat economy and gentle drying and cooling of the crop in one continuos operation. The good drying economy is due to the tapered shape and pattern of the air ducts. The drier is built from galvanised components for a long service life.

Dry water-based inks and coatings with one compact, efficient drying unit designed by XericWeb Drying Systems. The compact irAR dryer is designed to fit most narrow-web, flexo presses, such as those made by Comco, Propheteer, Nilpeter, Aquaflex, Gallus/Arsoma, Webtron and others. In addition, we have developed standard irAIR dryersfor Mark Andy series 2200 & 4000, the Edale Sigma, and the Aquaflex Servo FPL flexo presses.