32 results found

AT Glenroy, Inc., the hope for a better world environment starts at home--rooted in a commitment to the local community. The Menomonee Falls, Wisconsin-based flexible packaging manufacturer strives to ensure that its manufacturing operations have as little environmental impact as possible on the residential neighborhoods nearby.

There are many ways lean manufacturers stand apart from their competitors, but among the most notable is a commitment to continuous im - provement. A company’s devotion to systematic operational enhancements is not prompted by poor performance or customer dissatisfaction, Glenroy Inc. President Rich Buss explains.

For over 4 decades, Glenroy has been a leading supplier for the metalized balloon film industry. The balloon film roll stock Glenroy manufactures and prints is supplied to balloon manufacturers for the forming and sealing, packaging, and distribution process.

MLXT is a metallized, non-sealable, biaxially oriented polypropylene (OPP) film. Metallized. Treated one side. Barrier for grease and oils in multi-wall bags. Good moisture barrier, good oxygen barrier, excellent craze resistance, excellent metal adhesion, excellent adhesion to cohesive sealant, and metallized surface can be printed with proper preparation.

MT is a metallized, non-sealable, biaxially oriented polypropylene (OPP) film. Metallized. Treated one side. Barrier for grease and oils in multi-wall bags. Excellent craze resistance in extrusion laminations, excellent moisture barrier, good oxygen barrier, excellent light barrier, excellent metal anchorage, and wide heat seal range.

Non-sealable, biaxially oriented polypropylene (OPP) film. Treated one side. Embossed and metallized one side. Holographic films to enhance graphic appeal of board laminations, labels, and flexible packaging. Brilliant appearance. Treated surface offers excellent printabiliity and lamination bonds.

Alternative products are available to create unique products for specialty applications including: Laminations of films to foam, bubble, and spun bonded polypropylene. Fabric for increased material strength and puncture resistance. Colors and printed materials for product identification and instructions. Anti-Static additives for sensitive electronic components, Vapor corrosive inhibitor for sensitive metals, Metalized laminations to create a reflective surface for increased thermal properties.

Metallyte 70 MET is a moderate barrier, metallized OPP film for use in adhesive and extrusion laminations to reverse-printed outer webs. The proprietary broad seal range layer offers excellent hot tack, seal integrity, and lap seal range when used with a coextruded outer web.

Rollprint’s ClearFoil family of products offer high moisture vapor and oxygen barrier without the use of aluminum foil. The barrier-coated films can be laminated or extrusion coated for a weld or peelable seals to most any rigid or flexible packaging material. Several barrier levels are available to meet most performance/cost requirements. ClearFoil® structures are appropriate for applications where high barrier and product visibility are required. The table below provides guidance on ClearFoil® ultra-high barrier material selection.

AmTopp CW film is a pigmented white co-extruded, biaxially oriented base film intended for vacuum metalization.