Oliver-Tolas Healthcare Packaging

Dispos-a-vent® barrier pouches are designed with a disposable Tyvek® or paper vent for maximum airflow during EtO sterilization and a spacious high barrier film or foil pouch area for easy conversion after sterilization. Package your device in a Dispos-a-vent® pouch for sterilization. After the sterilization cycle is complete, make a seal enclosing your device in the film or foil area of the pouch and cut off and dispose of the Tyvek® or paper vent. The result is a sterile device in a film or foil pouch with superior barrier properties.

Oliver-Tolas offer a wide range of multi-layer films to meet the industry's needs for thermoformable films. Available in 3-, 5- or 7-layer constructions, Oliver-Tolas' forming films offer the strength and formability required for packaging medical devices on form, fill and seal equipment. Pairing an Oliver-Tolas peelable top-web with one of our forming films provides medical device manufacturers with a complete packaging solution for form-fill-seal and in-line flexible packaging applications requiring ETO and radiation sterilization.

Oliver-Tolas Healthcare Packaging provides custom designed bags to meet the specific requirements of your company's individual application. Our Isotech® bag is designed to perform as a protective barrier for your product and developed to be used with aseptic systems such as barrier isolators and automated filling lines.

Oliver-Tolas™ Healthcare Packaging has designed theOstasis™ reinforced pouch in response to medical device manufacturers' requirements for a sturdy package that can provide protection against pin-holing and film fracturing created by blister trays or heavy and bulky devices. Ostasis™ pouches are reinforced with a DuPont™Tyvek® strip on each end of the clear film side of the pouch for added puncture resistance. Package your device in an Ostasis™ reinforced pouch for added protection against the rigors of sterilization, distribution and storage.

Oliver-Tolas' Osurance® zone coated lid is like a breath of fresh air for your medical device. Why coat the entire lid surface? Osurance® allows you to put the adhesive only where you need it: Adhesive is applied to a controlled area along the package flange Adhesive exposure to your device is eliminated Porosity is maximized By eliminating adhesive in the non-sealed areas, porosity is maximized and sterilization cycles are shortened, providing you with real cost savings. When you specify Osurance®, you can breathe easy knowing you're making the best impression, using the highest quality zone coated lid on the market. Only from Oliver-Tolas.

Oliver-Tolas Healthcare Packaging is the world leader in high quality, innovative hot melt adhesives, water based adhesives, and healthcare packaging. Our research and development of proprietary heat seal coatings led to the development of SealScience® coating technology for Tyvek®, foils, papers and films for medical device packaging and pharmaceutical packaging.

Oliver-Tolas Healthcare Packaging's puncture resistant pouches utilize the strength of 1073B Tyvek® and a 4.0 mil material lamination to provide the ideal pouch for the packaging of surgical instruments, medical instruments, and other angular shaped medical devices or procedural kit trays. Our 1.0 mil biax nylon/3.0 mil LLDPe film has excellent clarity for product visibility while providing the durability and strength needed to maintain sterility throughout sterilization, shipping and storage of your product.

Zone coated Tyvek® lidding, only from Oliver-Tolas, allows for the precise application of heat-seal adhesives within the seal area only. Now available in rollstock form, zone coated rollstock enhances manufacturing efficiencies by providing a zone coated rollstock lidding option to run on high volume form fill seal production equipment. Make the switch from lower efficiency die cut lid packaging lines to high efficiency form fill seal packaging lines.

Oliver-Tolas™ Healthcare Packaging introduces VisiSeal®, the first in a family of proprietary SealScience® adhesives that change color when sealed to enable MDM's and end-user's to visually inspect the package integrity before opening. VisiSeal® adhesives can be used for visual assurance of a package's authenticity as part of a multi-layered approach to an anti-counterfeiting packaging strategy. Increase confidence in the seal integrity of your packaged product potentially reducing the occurrence of product recalls and patient infections. In combination with a Vision System, VisiSeal® can automate your inspection process and eliminate the need for human inspection.

Only Oliver-Tolas' Xhale® adhesive with sure-seal DotCoat® technology adds value and function to Tyvek®, Ovantex® and paper for roll stock, lid and pouch applications. Oliver-Tolas' proprietary Xhale® adhesive application process enables medical device manufacturers to save money with reduced EtO sterilization cycles and faster set-up and run speeds. Xhale® offers greater porosity; superior anchorage; superior humidity and condensation resistance; and no yellowing over time from exposure to UV light.