To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed.

Continuous Flow Drier
KCD 3

Effective and Economical Drying

Kongskilde KCD drier is designed to provide the
best possible heat economy and gentle drying and
cooling of the crop in one continuos operation.
The good drying economy is due to the tapered
shape and pattern of the air ducts.
The drier is built from galvanised components for a
long service life.

The way through the drier

The grain is filled into the buffer section on top of the
drier.
The crop zigzags slowly through the drying sections.
Then the crop passes the cooling section, where it is
cooled by natural air.
In the discharge section swing gates control the velocity of the grain through the drier.
The bottom hopper has inspection door.

The Drying– and Cooling Section keeps
clean
The KCD drier has a smooth surface on the inside.

The Buffer Section

The top buffer section has a roof with inspection
door. This reduces the pollution of dust and moist air
into the neighbouring environment.

Even Discharge
The swing gates of the discharger provide an even
flow of the grain through the column.
The discharge capacity is variable.
The discharger is mounted with 0,55 kW electric
motor.
A pulse discharger with swing gates can be delivered
for high moisture grains e.g. maize.

All Dimensions i mm.

Variable Drying- and Cooling Zone
The size of the drying- and cooling zones is variable
by means of shutters in the hot air plenum.
Height

Optional Extras
• Extra buffer sections for intermittent supply of
grain.
• Level sensors in the buffer section and outlet hopper ensure a constant supply of grain as the drier
works.
• Kongskilde supplies blowers and heaters for oil,
gas and hot water.
• Kongskilde supplies control panels with automatic
control to comply with customer wishes.

Nominal Capacities

Wheat 19% - 15%
Maize 35% - 15%
Type
Holding Holding Drying air 65°C
Drying air 90°C
Drying air 110°C

Volume Capacity Cap.
Heat
Cap.
Heat
Cap.
Heat
Regr.
Regr.
Regr.

0,75T/m3
KCD
M3
T
T/H
Kcal/H
T/H
Kcal/H
T/H
Kcal/H

3.07.3
3.08.3
3.09.3
3.10.3
3.11.3
3.12.3
3.13.3
3.14.3
3.15.4
3.16.4
3.17.4
3.18.4
3.19.4
3.20.4

24,5
26,6
28,7
30,8
32,9
35,0
37,1
39,2
44,3
46,4
48,5
50,6
52,7
54,8

18,4
20,2
21,5
23,1
24,7
26,3
27,8
29,4
33,2
34,8
36,4
38,0
39,5
41,1

5,2
6,3
7,3
8,4
8,4
9,4
10,5
11,5
12,6
12,6
13,6
14,7
15,7
16,8

302.400
362.880
423.360
483.840
483.840
544.320
604.800
665.280
725.760
725.760
786.240
846.720
907.200
967.680

8,6
10,3
12,0
13,7
13,7
15,4
17,1
18,8
18,8
20,6
22,3
24,0
25,7
27,4

453.600
544.320
635.040
725.760
725.760
816.480
907.200
997.920
977.920
1.088.640
1.179.360
1.270.080
1.360.800
1.451.520

2,4
2,9
3,4
3,9
4,3
4,8
4,8
5,3
5,8
6,3
6,8
7,3
7,3
7,8

574.560
689.472
804.384
919.296
1.034.208
1.149.120
1.149.120
1.264.032
1.378.944
1.493.856
1.608.768
1.723.680
1.723.680
1.838.592

Air
Height
Regr.

Weight

M3/H

mm

Kg

29.400
33.600
37.800
42.000
46.200
50.400
54.600
58.800
63.000
67.200
71.400
75.600
79.800
84.000

8.657
9.192
9.727
10.262
10.797
11.332
11.867
12.402
13.472
14.007
14.542
15.077
15.612
16.147

20.175
22.050
23.925
25.900
27.775
29.850
31.925
33.900
38.025
39.900
41.775
43.950
46.025
48.100

Kongskilde Industries A/S
DK-4180 Sorø, Denmark
Tel. +45 33 68 36 00
Fax. +45 33 68 86 27
E-mail: mail@km.kongskilde.com
www.kongskilde.com

121001428 GC/GB/KCD/DATA/0405

Subject to be changed without notice.

All capacities relate to input of moist, clean, 200C grain
Ambient air 150C and 70 % RH. - Driers used at lower ambient temperatures or erected outdoor need additional heat to reach
nominal capacity.
The drying capacity depend on actual blower and heater combination.
Grain is a biological product and change from lot to lot, - therefore all data are nominal only.
Larger driers are delivered upon request.