To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed.

PAN/LID CONVEYORS

• A Wide Variety of Conveyor Designs including Full or Partial Width
with Flush Grid, Raised Rib, Flat Top or Friction Top, Dual Strand
Conveyors, and Side Flexing Full or Partial Width Plastic Belt
Conveyors
• A Wide Variety of Conveyor Accessories including "T" or "L" Transfers,
Pan Turners, Turn/No Turn Curves, Turning Curves, Accumulators,
Metering, Grouping, By-Pass, Merging, etc.

PAN/LID CONVEYORS
FEATURES & BENEFITS
SERIES 900 & 1400, FLUSH GRID
Full or Partial Width Plastic Belt
Conveyor, Raised Ribs, Flat Top or
Friction Top

SERIES 900 & 1400, MOLD-TO-WIDTH
Dual Strands Plastic Belt Conveyor

SERIES 2200 & 2400, FULL WIDTH
Side Flexing Plastic Belt Conveyor

SERIES 2200 & 2400, PARTIAL WIDTH
Side Flexing Plastic Belt Conveyor

• Aluminum 6061-T6, low or high belting in
frame
• Intralox Series 900 & 1400:
– Raised ribs belt construction available
in grey or white polypropylene or in
blue Acetal
– Flush grid and flat top belt
construction available in grey or white
polypropylene in blue Acetal or in
brown heat resistant nylon
– Friction top belt available in black
diamond friction top or in black flat
friction top
• Aluminum 6061-T6, low or high belting in
frame
• Belt strength up to 200% higher than standard
table-top plastic chain
• Intralox Series 900 & 1400 Mold-to-Width belts:
– Flush grid (38% opening) or flat top (0%
opening) belt construction
– Grey polypropylene or blue Acetal
material
– 4 1/2” (115 mm) and 7 1/2” (191 mm) wide
belt available

• Aluminum 6061-T6, low or high belting
in frame
• Continuous path conveyors reduce the
number of drives required on a layout
• Intralox Series 2200 & 2400:
– Flush grid radius belt construction
– Grey polypropylene or blue Acetal
material
– From 6” (152 mm) to 72” (1829 mm)
wide belt available

• Aluminum 6061-T6, low or high belting in
frame with integral side guides
• Continuous path conveyors reduce the
number of drives required on a layout
• Intralox Series 2200 & 2400:
– Flush grid radius belt construction
– Grey polypropylene or blue Acetal
material
– From 6” (152 mm) to 72” (1829 mm)
wide belt available

Flush Grid

Raised Ribs

Flat Top

Diamond Friction
Top

Mold to Width

Flush Grid Radius

Flush Grid Radius

MECHANICAL FEATURES
• Outside frame of 13 1/4” (337 mm), 21 1/4” (540 mm), 27 1/4” (692 mm), 33 1/4” (845 mm), 37 1/4” (946 mm)
and other widths available on request
• All belts are available from 6” (152 mm) to 42” (1067 mm) in 1” (25 mm) increments
• Low or high belting in frame. Low: 1/4” x 8” (6 mm x 203 mm), High: 1/4” x 10” (6 mm x 254 mm)
• Motor and reducer shaft mounted, other mountings available on request (side drive, drive over, drive under)
• Standard reducer: Sew Eurodrive (Optional: Boston, Ohio, Tigear, Nord, Browning)
• Standard motor: Sew Eurodrive (Optional: US Motor, Leeson, Baldor, Reliance, Nord)
• Standard bearings: Dodge (Optional: Sealmaster, SKF)

• Outside frame of 13 1/4” (337 mm), 21 1/4” (540 mm), 27 1/4” (692 mm), 33 1/4” (845 mm), 37 1/4” (946 mm)
and other widths available on request
• Low or high belting in frame. Low: 1/4” x 8” (6 mm x 203 mm), High: 1/4” x 10” (6 mm x 254 mm)
• Motor and reducer shaft mounted, other mountings available on request (side drive, drive over, drive under)
• Standard reducer: Sew Eurodrive (Optional: Boston, Ohio, Tigear, Nord, Browning)
• Standard motor: Sew Eurodrive (Optional: US Motor, Leeson, Baldor, Reliance, Nord)
• Standard bearings: Dodge (Optional: Sealmaster, SKF)

• Outside frame of 13 1/4” (337 mm), 21 1/4” (540 mm), 27 1/4” (692 mm), 33 1/4” (845 mm), 37 1/4” (946 mm)
and other widths available on request
• Low or high belting in frame. Low: 1/4” x 8” (6 mm x 203 mm), High: 1/4” x 10” (6 mm x 254 mm)
• Motor and reducer shaft mounted, other mountings available on request (side drive, drive over, drive under)
• Standard reducer: Sew Eurodrive (Optional: Boston, Ohio, Tigear, Nord, Browning)
• Standard motor: Sew Eurodrive (Optional: US Motor, Leeson, Baldor, Reliance, Nord)
• Standard bearings: Dodge (Optional: Sealmaster, SKF)

• Outside frame of 22 1/4” (565 mm), 26 1/4” (666 mm), 30 1/4” (768 mm), 36 1/4” (920 mm), 42 1/4” (1073 mm)
and other widths available on request
• High in frame construction for inside frame with outside frame as side guides
• Motor and reducer shaft mounted, other mountings available on request (side drive, drive over, drive under)
• Standard reducer: Sew Eurodrive (Optional: Boston, Ohio, Tigear, Nord, Browning)
• Standard motor: Sew Eurodrive (Optional: US Motor, Leeson, Baldor, Reliance, Nord)
• Standard bearings: Dodge (Optional: Sealmaster, SKF)

PAN/LID CONVEYORS
OPTIONS

SERIES 900 & 1400, FLUSH GRID
Full or Partial Width Plastic Belt
Conveyor, Raised Ribs, Flat Top or
Friction Top

• Nose down, nose up
• Transfer rollers
• Adjustable guides (funnel type)
• Anti-static device (when required)

SERIES 900 & 1400, MOLD-TO-WIDTH
Dual Strands Plastic Belt Conveyor

• Nose down, nose up
• Transfer rollers
• Interlace
• Adjustable guides (funnel and straight type manually or screw adjustable)
• Anti-static device (when required)

SERIES 2200 & 2400, FULL WIDTH
Side Flexing Plastic Belt Conveyor
• Nose down, nose up
• Transfer rollers
• Adjustable guides (funnel and straight type manually or screw adjustable)
• Anti-static device (when required)

SERIES 2200 & 2400, PARTIAL WIDTH
Side Flexing Plastic Belt Conveyor

• Nose down, nose up
• Transfer rollers
• Adjustable guides (funnel and straight type manually or screw adjustable)
• Anti-static device (when required)

Headquarters:
2115 W. Laburnum Ave.
Richmond, Virginia 23227
Tel: 1-800-225-3771
or 1-804-355-7961
Fax: 1-804-342-9724
sales@amfbakery.com

Europe Office:
6 The Sidings
Station Road, Guiseley
Leeds LS20 8BX, England
Tel: 44-1943-875703
Fax: 44-1943-871806
sales-europe@amfbakery.com

AMF’s focus on continuous improvement may result
in changes to machinery specifications without notice.

Asia Office:
FOR MORE INFORMATION PLEASE CALL YOUR ACCOUNT MANAGER OR
2102B, B-Bldg.
No.3 Estate Mansion
No.1 Shuguangxili Rd.
Beijing, China 100028
Tel: 010-58222949
Fax: 010-58222952
sales-asia@amfbakery.com

1-800-BAKERS-1
www.amfbakery.com

08/2011